自動焊錫機的應用非常廣泛，不僅僅是小作坊的自動焊錫機應用，也應用到工廠的生產線上。生產線在大量制造時，焊錫機中的助焊劑測量比重及稀釋劑添加非常重要。最簡單的方法，就時定時使用比重計測定，但如何添加正確數量的助焊劑或稀釋劑，使比重維持在原來的值，則不容易。
When the production line is manufactured in large quantities, it is very important that the flux in the soldering machine measures the specific gravity and the addition of the diluent. The easiest way to do this is to use a hydrometer at regular intervals, but it is not easy to add the correct amount of flux or thinner to maintain the specific gravity.
比重控制器是利用置于機器上方的助焊劑及稀釋劑容器接至助焊劑槽的管路上，裝有電磁閥，電磁閥的開放及關閉受比重及液面感應器控制，助焊劑及稀釋劑藉重力流入助焊劑槽中，而完成比重控制的工作。
The gravity controller is connected to the flux tank by a flux and thinner container placed above the machine. It is equipped with a solenoid valve. The opening and closing of the solenoid valve is controlled by the specific gravity and liquid level sensor. Flux and thinner. Gravity flows into the flux tank to complete the work of gravity control.
目前使用較為普遍的為數字式自動比重控制方式。為了達到焊錫作業的零缺點，助焊劑的比重正確與否很重要的。自動控制比以作業員用傳統比重計測定要可靠，其測定誤差在0.003到0.005之間，且可以結合傳統的標準的比重計及試管互相比較。
At present, the more commonly used digital automatic gravity control method. In order to achieve the zero defect of the soldering operation, it is important that the flux is correct or not. The automatic control is more reliable than the measurement by the operator using a conventional hydrometer, and the measurement error is between 0.003 and 0.005, and can be compared with the conventional standard hydrometer and the test tube.
深圳市歐力克斯科技有限公司 主營自動點膠機，自動焊錫機，自動灌膠機，自動鎖螺絲機，智能機器人等，更多信息請直接查看咨詢 http://www.szolks.com