當前位置:自動化網>Omega工業測量(中國)門戶>產品中心>OME-ET-7000_OME-PET-7000 Series
          OME-ET-7000_OME-PET-7000 Series

          OME-ET-7000_OME-PET-7000 Series

          分  類:其它

          品  牌:歐米茄

          廠  商:Omega工業測量(中國)

          型  號:OME-ET-7000_OME-PET-7000 Series

          相關行業:

          發布時間:2019-12-19 18:00 瀏覽人數:

          最新產品

          產品詳情
          參數
          包裝
          • Multi-Function Web Based Ethernet I/O Modules–Models Available For Thermocouple, RTD, Analog Voltage and Current Input
          • Built-In Web Server for Remote Configuration and I/O Monitoring/Control
          • Web HMI
          • Communications Security
          • Supports Modbus? TCP and UDP Protocols
          • OME-PET-7000 Series Features PoE (Powerover-Ethernet)

          • The OME-ET-7000/OME-PET-7000 Series, a web-basedEthernet I/O module, features a built-in web serverwhich allows configuration, I/O monitoring and I/Ocontrol by simply using a regular web browser. Remotecontrol is as easy as browsing the Internet.With the web HMI function, programming or HTML skillsare not required; creating dynamic and attractive webpages for I/O monitoring and I/O control is easy. TheOME-ET-7000/OME-PET-7000 Series offers easy andsafe access for users at any time, from any location. Inaddition, the OME-ET-7000/OME-PET-7000 Series alsosupports Modbus TCP protocol that makes perfectintegration to SCADA software.OME-PET-7000 features “PoE” where not only data butalso power is carried through an Ethernet cable. Thisfeature makes installation of OME-PET-7000 easy. Nomore unnecessary wires; only an ethernet cable thattakes care of everything in the field.

            Features
            1. Power over Ethernet (PoE)
            The OME-PET-7000 series module can be powered byan IEEE802.3af compliant PoE switch. Both data andpower can be carried by an Ethernet cable eliminatingthe need for additional wiring and power supply.
            2. Built-in Web ServerEach OME-ET-7000/OME-PET-7000 module hasa Built-in web server that allows the users to easilyconfigure, monitor and control the module from aremote location using a regular web browser.
            3. Web HMIThe Web HMI function allows the users to createdynamic and attractive web pages to monitor andcontrol the I/O points. Users can upload specific I/Olayout pictures (bmp, jpg, gif format) and define adescription for each I/O point. No HTML or Java skillsare needed to create the web pages.
            4. Communication SecurityAccount and password are needed when logging intothe OME-ET-7000 web server. An IP address filteris also included, which can be used to allow or denyconnections with specific IP addresses.
            5. Support for both Modbus? TCPand Modbus UDP ProtocolsThe Modbus TCP, Modbus UDP slave functionon the Ethernet port can be used to provide data toremote SCADA software. A free MODBU S softwaredevelopment toolkit is included on the utility softwareCD that is supplied with the OME-ET-7000/OME-PET-7000 Series modules.
            6. Built-in I/OVarious I/O components are mixed with multiplechannels in a single module, which provides the mostcost effective I/O usage and enhances performance ofthe I/O operations.
            7. Dual WatchdogThe Dual Watchdog consists of a module Watchdogand a communication Watchdog. The action of AO/DOare also associated with the Dual Watchdog.Module Watchdog is a Built-in hardware circuit tomonitor the operation of the module and will reset theCPU if a failure occurs in the hardware or the software.Then the power-on value of AO/DO will be loaded.Communication Watchdog is a software function tomonitor the communication between the host and theOME-ET-7000/OME-PET-7000 module. The timeout ofthe communication Watchdog is programmable, whenthe OME-ET-7000/OME-PET-7000 doesn’t receivecommands from the host for a while, the watchdog forcesthe AO/DO to pre-programmed Safe Value to preventunpredicatable damage of the connected devices.
            8. Power-on Value and Safe ValueBesides setting by the set AO/DO commands, theAO/DO can be set under two other conditions.
            Power-on Value: The Power-on Value is loaded into theAO/DO under 3 conditions: Power-on, reset by ModuleWatchdog, reset by reset command.
            Safe Value: When the Communication Watchdog isenabled and a Communication Watchdog timeoutoccurs, the “safe value” is loaded into the AO/DO.
            9. I/O Pair ConnectionThis function is used to create a AI/DI to AO/DOpair through the Ethernet. Once the configuration iscompleted, the OME-ET-7000/OME-PET-7000 modulecan poll the status of remote AI/DI devices and then usethe Modbus TCP protocol to continuously write to localAO/DO channels in the background.
            10. Highly Reliable Under Harsh Environments
            ? Wide Operating Temperature Range: -25 to 75°C (-13 to 167°F)
            ? Storage Temperature: -30 to 80°C (-22 to 176°F)
            ? Humidity 10 to 90% RH (non-condensing)


















          暫無內容提供
          暫無內容提供

          聯系方式

          中國自動化網安全提示,在購買供應商商品時,請一定要先審核好企業信息是否真實,謹防網上詐騙。
          公司名稱:Omega工業測量(中國)
          聯系人: 王先生
          聯系電話:02161973664
          手機號:
          傳 真:
          電子信箱:kevin.wang@cn.omega.com
          公司網站:http://cn.omega.com
          公司地址:上海市宜山路1698號102單元
          留言反饋
          • 評價:

          • 關于:

          • 聯系人:

          • 聯系電話:

          • 聯系郵箱:

          • 需求意向:

          • 驗證碼:

            看不清楚?

          • 在線咨詢
          主站蜘蛛池模板: 激情五月婷婷网| 中文人妻无码一区二区三区| 男人j进女人p免费视频 | 久久精品国产999大香线焦| 玉蒲团之风雨山庄| 国产一区二区三区免费看| 一进一出动态图| 天天操天天干天天爽| 久久中文字幕视频| 欧美xx性在线| 人人妻人人爽人人澡AV| 肉伦禁忌小说小可的奶水| 国产白嫩美女在线观看| 99在线免费观看| 成人做受视频试看60秒| 久久无码人妻一区二区三区 | 一级成人毛片免费观看| 日本韩国一区二区| 亚洲国产精品人久久| 男女免费观看在线爽爽爽视频| 国产一区二区精品| 99re6在线| 国产精品日本一区二区在线播放| www.onlyfans.com| 日产精品一二三四区国产 | 高清永久免费观看| 国产精品无码一区二区在线观一| bestialityvideo另类骆驼| 成人精品一区二区三区中文字幕 | 看久久久久久A级毛片| 国产一区二区三区日韩欧美| 成人草莓视频在线观看| 国产精品无码无卡在线播放| aaaa级毛片| 差差漫画在线登录入口弹窗页面 | 国产精品无码AV天天爽播放器| s级爆乳玩具酱国产vip皮裤| 成人黄色小说网站| 久久久xxxx| 日本视频一区在线观看免费| 亚洲AV无码国产精品永久一区|